AR-15 / AR-10 / M16 / M4 Services & Prices


RE-CONTOUR BARREL IN FRONT OF FSB/GAS BLOCK, OR UNDER HANDGUARD $75
Let us know the diameter to which you would like us to re-contour your barrel. This service includes parkerizing to Mil Spec STD171 or bead blasting.

*If you send a complete upper, an extra service charge of $45 will be assessed for the disassembly/assembly of the upper.
*AR barrels with the FSB in place require an up-charge of $15, for FSB removal and reinstallation using new pins.



RE-CONTOUR ENTIRE BARREL $105
Let us know the diameter to which you would like us to re-contour your barrel. This service includes parkerizing to Mil Spec STD171 or bead blasting.

*If you send a complete upper, an extra service charge of $45 will be assessed for the disassembly/assembly of the upper.
*AR barrels with the FSB in place require an up-charge of $15, for FSB removal and reinstallation using new pins.



REPLACE DESTROYED THREADS $135
If you have stripped off your barrel threads by attempting to remove a pinned and welded muzzle device, this is the service you will need. We will turn down the old threads, install a bushing that will be threaded and soldered onto the muzzle, and rethread it to the original pitch. This will allow you to keep your original barrel length. On non-stainless barrels, we'll touch up the threads with Oxpho-Blue to prevent corrosion.

*If you just want us to cut off the damaged threads and shorten the barrel, you won't need this service. Instead, please select the barrel threading service for $55.
*If you send a complete upper, an extra service charge of $45 will be assessed for the disassembly/assembly of the upper.
*AR barrels with the FSB in place require an up-charge of $15, for FSB removal and reinstallation using new pins.



BARREL THREADING $55
We'll cut, crown and thread to the selected thread pitch and barrel length. These threads will be the perfect size (Class 3A) and will be concentric to the bore (very important for the use of a suppressor). On non-stainless barrels we'll touch up the threads with Oxpho-Blue to prevent corrosion.

*If you send a complete upper, an extra service charge of $45 will be assessed for the disassembly/assembly of the upper.
* AR barrels with the FSB in place require an up-charge of $15, for FSB removal and reinstallation using new pins.



CROWNING AND/OR CUTTING WITHOUT THREADING $25
We'll cut and crown your barrel to the selected length.

*If you send a complete upper, an extra service charge of $45 will be assessed for the disassembly/assembly of the upper.
* AR barrels with the FSB in place require an up-charge of $15, for FSB removal and reinstallation using new pins.



DRILL & PIN LOW-PRO GAS BLOCKS IN PACE $45
This service is for a single pin, and only for barrels up to .30 caliber.

*If you send a complete upper, an extra service charge of $45 will be assessed for the disassembly/assembly of the upper.


LOCATING DIMPLE $15
We dimple the bottom of the barrel to properly index the gas block above the gas port.

*If you send a complete upper, an extra service charge of $45 will be assessed for the disassembly/assembly of the upper.


COMPLETE UPPER RECEIVER DISASSEMBLY/REASSEMBLY $45
*This service doesn't include installation of new/swapped FSBs onto an undrilled barrel.


COMPLETE UPPER RECEIVER ASSEMBLY ONLY $35
*Handguard/barrel swaps require the disassembly/reassembly service.
*This service doesn't include installation of new/swapped FSBs onto an undrilled barrel.



LOWER RECEIVER ASSEMBLY $25


REMOVE PINNED AND WELDED (NOT SOLDERED OR PRESSED ON) MUZZLE DEVICE $45
We'll remove the pinned and welded muzzle device and clean up the threads. Be aware that the muzzle device will be destroyed during this process. For this service there is no need to disassemble the complete upper receiver.


MIL SPEC STD171 PHOSPHATE FINISH $45
This price is for one barrel (with or without FSB) and one muzzle device.

*If you send a complete upper, an extra service charge of $45 will be assessed for the disassembly/assembly of the upper.


BEAD BLASTING $25
This price is for one stainless steel barrel.

*If you send a complete upper, an extra service charge of $45 will be assessed for the disassembly/assembly of the upper.


Important information for sending work to us:
Our return shipping fee to the lower 48 states is $15 for barrels/uppers, with a maximum length of
20", and $25 for anything longer. Please add $10 for shipping to Alaska or Hawaii.

Please make sure to include the following when you ship in your work.
- Your payment (Money Order or Check - NO Cash)
- List of the work you would like us to perform
- Address for return shipping


Pricing subject to change.